Back to overview

iPhone Wifi Adapter for BMW

Models after ca. 2001 / Check details / Generation 2

Manufacturer
Carly für BMW
Item number
1010
Content
1 piece
Available

Ready to ship



Your Price: 61,90

incl. VAT (EU) 9,90 € Shipping International



NEW: WITH A PURCHASE OF THIS ADAPTER YOU WILL GET IN THE LITE VERSION OF CARLY FOR BMW:

★ FREE FAULT-REPORT ★

★ FREE USED-CAR-CHECK ★


This is the Generation 2 Original Carly Wifi Adapter for iOS (IPhone/IPad).

This adapter can only be used for: BMW, Mercedes, Porsche, Renault

Carly supports all BMW-models starting ca. 1996 until today.

Below you can check which models are supported by this adapter.

>>> Check here to see particulary the support of your model <<<


Your Benefits:

  • Support of ALL future and current functions
  • Adapter-Updates

This adapter supports all functions (esp. diagnostics and codings) for:

  • 1 series: all models
  • 2 series: all models
  • 3 series: all models except E36, E46 before ca. 2001 -> need OBD 20 PIN for OBD-ports under the hood
  • 4 series: all models
  • 5 series: all models except E39 before ca. 2001 -> need OBD 20 PIN for OBD-ports under the hood
  • 6 series: all models
  • 7 series: all models except E38 before ca. 2001 -> need OBD 20 PIN for OBD-ports under the hood
  • X1, X3, X4, X5, X6: all models
  • Z3, Z4: all models except E36
  • Mini (R55, R56 or newer - not R50, R52, R53)

You can find all currently possible codings here.

 


A free evaluation of diagnosis and a used car check with the Carly for BMW Lite app is included when you purchase the adapter.

The Full Version of the App is not part of this offer and can be downloaded within Carly for BMW. The free Carly for BMW Lite application is available in the AppStore.

 

>>> Here are the first steps with Carly for BMW <<<


Information about service reset features for E36, E38, E39, E46, E53, E83, E85:

For models before ca 2001 with a round OBD port under the hood, you need this: HERE
For models after ca 2001 with a normal OBD port in the car, you need this: HERE

Protocols: 

  • SAE J1850 PWM (41.6 kbaud)
  • SAE J1850 VPW (10.4 kbaud)
  • ISO 9141-2 (5 baud init, 10.4 kbaud)
  • ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
  • ISO 14230-4 KWP (fast init, 10.4 kbaud)
  • ISO 15765-4 CAN (11 bit ID, 500 kbaud)
  • ISO 15765-4 CAN (29 bit ID, 500 kbaud)
  • ISO 15765-4 CAN (11 bit ID, 250 kbaud)
  • ISO 15765-4 CAN (29 bit ID, 250 kbaud) 

Interface specification: 

  • Data transfer rate: 38400 8-N-1 
  • Voltage: 12V nominal 
  • Idle current: 45mv 
  • No adapters or extra power supply needed
  • Powered via OBD2 interface of car 
  • Dimensions: 8.8x4.6x2.6cm with 16 PIN angle